SERVICING & MAINTENANCE

DISASSEMBLE AIRWASH

The Aarrow Ecoburn air wash may be disassembled for cleaning or adjustment. To achieve this, the following procedure should be followed:

Note - This should only be carried out when the fire is cold and unlit.

•Unscrew (Anti-clockwise) the airwash control knob (Fig. 14).

 

 

•Move outer cover up by tapping each end of the

Fig. 16. Inner slider removal

 

cover with a soft mallet.

 

 

•Lift outer cover free from body, being careful not to damage the ends of each lug (Fig. 15).

•Slide off the spacer tube from the centre stud and retain for re-assembly.

•Unscrew the inner slider and clean/replace (Fig.16).

•Refit using the reverse of this procedure.

FUEL RETAINER BARS - INSPECTION

Fuel retainering bars are supplied with the stove. Periodically check for any bowing or heat warpage to the fuel retaining bars and replace as necessary.

Note: This operation should only be carried out when the appliance is unlit and cold.

Fig. 14. Unscrew control knob

Fig. 15. Lifting cover from body

22

Aarrow Ecoburn Wood & Multifuel Stoves