SERVICING & MAINTENANCE

FIRE DOOR GLASS

In the event of the door glass being broken it can easily be replaced.

Note: This operation should only be carried out when the appliance is unlit and cold.

•The door should be lifted off the hinges so that the operations can be carried out on a workbench or similar level surface.

•Unscrew the four hex bolts, on the inside of the door securing the retaining clips.

•Carefully remove any pieces of broken glass, and sealing gasket wearing suitable gloves.

•Re-place the gaskets and line them up in relation to the door frame. (Fig. 17)

Fig. 17. Lining up the gasket

•Re-seat the new glass, ensuring the sealing gasket is flat and in contact with the glass. (Fig. 18)

Fig. 18. Fitting the glass

•Replace the four retaining clips and bolts. Do not over-tighten the bolts as damage may occur to the glass (Fig.19) Re-place the door carefully over the hinges and slot in place.

Fig. 19. Tightening the glass clips

Aarrow Ecoburn Wood & Multifuel Stoves

23