Chapter 3 | |
|
|
3-2. Advanced BIOS Features
Phoenix – Award WorkstationBIOS CMOS Setup Utility
Advanced BIOS Features
► Hard | Disk Boot Priority | Press Enter |
Quick Power on Self Test | Enabled | |
First Boot Device | Floppy | |
Second Boot Device | Hard Disk | |
Third Boot Device | CDROM | |
Boot Other Device | Enabled | |
Swap Floppy Drive | Disabled | |
Boot Up Floppy Seek | Disabled | |
Boot Up NumLock Status | On | |
Security Option | Setup | |
Small Logo(EPA) Show | Disabled | |
Item Help
↑↓:Move Enter:Select
Hard Disk Boot Priority:
This item selects the hard disks booting priority. By pressing <Enter> key, you can enter its submenu where the hard disks detected can be selected for the booting sequence to boot up system.
This item functions only when there is the option of [Hard Disk] in any one of the First/Second/Third Boot Device items.
!Bootable Add-in Device:
This item selects the priority of bootable
Quick Power On Self Test:
When set to [Enabled], this item speeds up the Power On Self Test (POST) after powering on the system. The BIOS shorten or skip some check during the POST.
First Boot Device / Second Boot Device / Third Boot Device / Boot Other Device:
Select the drive to boot first, second and third in the [First Boot Device], [Second Boot Device], and [Third Boot Device] items respectively. The BIOS will boot the operating system according to the sequence of the drive selected. Set [Boot Other Device] to [Enabled] if you wish to boot from another device other than these three items.
Swap Floppy Drive:
When set to [Enabled], and the system is booting from the floppy drive, the system will boot from drive B instead of the regular drive A. There must be two floppy drives connected in the system to use this function.
