1-2

Chapter 1

 

 

Supports Advanced Configuration Power Interface (ACPI)Supports Desktop Management Interface (DMI)AMI BIOS12.Internal I/O Connectors1x AGP slot5x PCI slots1x Floppy port supports up to 2.88MB2x Ultra ATA/133/100/66/33 connectors2x Serial ATA 150 connectors2x USB headers2x IEEE 1394 headers1x CD-IN, 1x AUX-IN header13.Back Panel I/O1x PS/2 Keyboard, 1x PS/2 mouse2x Serial port connectors, 1x Parallel port connector1x S/PDIF Out connectorAUDIO1 connector (Rear-Left / Rear-Right, Center/Subwoofer)AUDIO2 connector (Mic-In, Line-In, Front-Left/Front-Right)2x USB, 1x RJ-45 LAN Connector14.MiscellaneousATX form factor

Hardware Monitoring – including Fan Speed, Voltages, CPU and system temperature

Supports Wake Up by LAN, Modem Ring, RTC Alarm, Keyboard and Mouse Power OnSupports STR (Suspend to RAM)Onboard debug card design with 7-segment display15.Order Information
ModelFeatures

SI7

SATA, 10/100M LAN

SI7-G

SATA, Gigabit LAN

Supports Wake On LAN, Modem, but your ATX power supply 5V standby power must be able to provide at least a 720mA current capacity. Otherwise, the functions may not work normally.

This motherboard supports the standard bus speeds of 133/100/66MHz that are used by specific PCI, processor and chipset specifications. Exceeding these standard bus speeds is not guaranteed due to the specific component specifications.

The Serial ATA controller only supports Ultra DMA/ATA100 or higher hard drive. Do not use hard drives under this specification, or it won’t work.

Specifications and information contained herein are subject to change without notice.

SI7 Series