D-2

Appendix D

 

 

6.Click [OK].

7.Choose [Yes, I want to restart my computer now.], and click [Finish] to complete setup.

Note: In order to enable the WOL (Wake-up On LAN) function for SI7 and SI7-Gmodel in Windows 2000 and Windows XP, it is necessary to change the value of the “Wake Up Capabilities” property into “Magic Frame”. Please refer to the following two steps:

1.After finished the driver installation, check the [Network adapters] in the [Device Manager]. You will find the [Broadcom 440x 10/100 Integrated Controller] is successfully installed.

Select [Broadcom 440x 10/100 Integrated Controller]. Right click your mouse to enter its properties.

2.Select [Advanced] tab. Move your cursor to select the [Wake Up Capabilities] property option and then set the value option to [Magic Frame]. Click [OK] and restart your computer to complete setup.

SI7 Series