Abocom FM560C manual Hardware Installation, Windows NT and software installation

Models: FM560C

1 14

Page 3

1.Locate the PCMCIA slot of your system.

2.Align the PCMCIA FAX MODEM 56K PC Card toward the PCMCIA slot. Push evenly

and steadily until it is seated.

Notebook

Connects to RJ-11 phone jack

3.Connect the other end of the PC Card cable to the telephone line outlet.

4.You are now ready to continue the software installation.

CAUTION

To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.

For Windows NT does not support “Hot Insert/Remove”, be sure to complete the hardware installation as described above before you start

- 1 -

Image 3

Contents

Quick Installation Guide PCMCIA Fax Modem 56KM73-APO02-390 CTR 21 pan-European Certification REGULATORY STATEMENTSFCC Part 68 Registration FCC Part 15 RegistrationWindows NT and software installation HARDWARE INSTALLATION6. Select Search for the best driver… and click Next SOFTWARE INSTALLATION Installation for Windows3. Click Properties Installation for Windows5. Click Next to continue 6. Select Display a list of the known driversfor this device so that I can choose a 4. Select the Driver tab. Click the Update Driver…buttonspecific driver as illustrated below. And click Next 7. Click Have Disk when the following dialog box appears10. When the following figure appears, click Next 14. Click finish to complete the installation 12. Click Next to continue13. Click Yes to continue at the Digital Signature Not Found screen Installation for Windows Millennium ComputerÆPropertiesÆDevice Manager3. Click WDM Modem Enumerator to expand PropertiesÆDriverÆ Update Driver 5. Select Specify the location of the driver Advanced and click Next6. Select Display a list of all the drivers…and click Next Driver ÆUpdate Driver 13. Select Specify the location of the driver Advanced and click Next14. Select Display a list of all the drivers…and click Next Installation for Windows XP 4. Go to My Computer Installation for Windows NT