INSTALLATION
Hardware Connections
1.Insert the PCMCIA Ethernet card into the PCMCIA slot with the 68 pin connector toward your notebook’s PCMCIA slot and the label facing up.
2.Connect the media coupler to the PC card’s
3.Connect one end of an Ethernet cable to the coupler media. Plug the other end of the cable into a switch hub.
Software Installation
Insert the driver diskette into the floppy drive and set the current drive to the floppy drive. Then run INSTALL to install the real mode drivers such as ODI or NDIS 2.x or Packet Drivers into the target disk.
Windows 95 Installation
Make sure that the drivers of PCMCIA slot are well installed. The System Icon in the Control Panel can report on its functionality. Apart from above mentioned, any questions on this layer need to be taken up with the computer's manufacturer.
1.Insert PCMCIA Ethernet Card into PCMCIA slot. In New Hardware Found dialog box, select Driver from disk provided by hardware manufacturer”.
- 3 -