Abocom RE450 Windows NT, Windows 2000 Installation, Next, PCMCIA Ethernet card

Windows NT 4.0

1.Make sure that the Network Services already installed in the NT 4.0 system.

2.Insert the Ethernet Adapter into one of the system's PCMCIA Slots

3.Power up Windows NT 4.0

4.Open My Computer

5.Open Control Panel

6.Run the Network

7.Select Adapters page

8.Press Add to add network adapter

9.Press Have Disk button

10.Insert the driver disk into drive A:

11.Specify the path to ” A:\ and press OK

12.A dialog box will appear to adjust the driver's settings. The resources assignment to the adapter must be unique in the system.

13.Press OK when all settings are completed. Press Close to complete network setting.

Windows 2000 Installation

1.Connect one end of the cable for the PCMCIA Ethernet card to your computer and the other end to the port of the new hardware device. Windows will appear the following picture. Click Next.

- 7 -