Windows ME Installation
1.Connect the rectangular end of the USB cable into the USB host port of your computer, and the square end into the USB port of your
network adapter. Windows ME will automatically detect the device. Insert the device driver into your
2.Click Finish.
3.When the ISDN Configuration windows appears, click Next.
4.Select appropriate Switch Protocol and click
Next.
5.Enter the Phone numbers that your ISP provided and click Next.
6.Click Finish to complete the software installation.
7.To verify if your network adapter exists in your computer and well enabled, you can perform the following steps.
8.Go to Start, Settings, Control Panel, Systems and then Device Manager.
9.Click Intelligent ISDN Drivers and Network adapters to expand. If Intelligent CAPI 2.0 driver, Intelligent USB adapter and Intelligent ISDN WAN miniport are found,
- 10 -