24 10/100 + 2G Web/SNMP Switch
XP-3242is a high performance web-managed SNMP Layer 2 switch that provides users with switched 24 10/100Mbps Ethernet and 2 Gigabit ports. It is very suitable for a company to build a network, not only at the beginning phase, but also expanding into the future. The SNMP management
and remote control capability, plus plenty of other functions, along with its high quality, makes for easy and carefree use. The Gigabit module can either be copper or fiber media; it supports not only 100M fiber modules, but also Gigabit modules, such as 10/100/1000M RJ-45 copper ports and Gigabit fiber SC ports with 1000BASE-SX or 1000Base-LX, Gigabit RJ-45 plus GBIC ports, these allow users to increase their network response time at gigabit speeds and with great flexibility. An RS-232 serial port provides an easy way for installation and initial set-up.
Non-blockingand maximum wire speed performance are designed on all switched ports, it not only supports Auto-Negotiation, but also AUTO-MDIX function on all switched 24 10/100M RJ-45 ports and two Gigabit Copper ports no matter if in half or full duplex mode. These functions add to the convenience, ease of use, and reduce the matching effort between straight and cross-over line issues.
The XP-3242provides a convenient way to operate a layer 2 management through an Internet browser. User friendly pull-down manual makes learning how to use the XP-3242 easy. It’s also easy to control and easy to monitor. The XP-3242 supports, not only traditional SNMP functions, but also RMON 1,2,3,9 groups for advanced network analysis.
Uniquely, it supports both port-based VLAN and Tag-based VLAN to catch-up with the new applications coming in the VLAN age. To increase bandwidth applications, it supports 7 groups with up to 4 ports Trunk; and these trunk ports are with fair-over function to provide redundant back-up when one or some of the ports are in malfunction.
Total front access design and fully LED status display also adds to the ease of installation, inspection and maintenance efforts at rackmount environments. In addition an extra LED display reflects the fan status to help prevent over-heating issues, if the fan were to malfunction; thus adding to the protection of the unit and the investment.
FEATURES
Non-blocking, full-line speed, store-and-forward, Max. packet length 1568 byte Auto-Negotiation and Auto-MDIX on all 10/100/1000M copper ports
24 10/100 RJ-45 ports, and 2 Gigabit port module with copper ports or fiber ports 3M bit packet buffer and 1M bit control buffer
Up to 14K MAC entries and 4K VLAN entries
Support flow control for both half- or full-duplex operation Support Head-of-Line blocking prevention
Support broadcast storm filtering
Support port-based VLAN and 802.1Q tag-based VLAN Support 802.1v protocol-based VLAN classification Support 802.1x Authentication and Authorization Support IP Multicast, IGMP snooping
Support 2-level priority queuing
