INSTALLATION
8
9
Position the dryer so it clears the gripper opening mechanism on all three delivery gripper bars. The arm must clear both the top and bottom of the dryer.The photo shows the arm clearing the top of the dryer (subject arrow). After positioning the dryer, tighten the bolts holding the mounting brackets to the press frame and the bolts holding the dryer to the mounting brackets.
NOTE: If the press is equipped with an Airtech sprayer, pro- ceed to step 11.
Attach two hoses to the elbows in the sprayer housing (subject arrow, upper picture) and run the hose through the hole in the side frame (subject arrow, lower picture ). Note how the hoses are tied together with a zip tie in the upper picture on the left hand side.
13
