Chapter 5: Software
There are sample programs provided with the card in C, Pascal, QuickBASIC, and several Windows
languages. DOS samples are located in the DOS directory and Windows samples are located in the
WIN32 directory. The following paragraphs describe the setup program and the 16- and 32-bit utility
drivers.
SETUP.EXE
This program is supplied in the root or base directory as a tool for you to use in configuring jumpers on
the card. It is menu-driven and provides pictures of the card on the computer monitor. You make simple
keystrokes to select functions. The picture on the monitor then changes to show how the jumper should
be placed to effect your choices.
The setup program is a stand-alone program that can be run at any time. It does not require that the card
be plugged into the computer for any part of the setup. The program is self-explanatory with operation
instructions and on-line help.
To run this program, at the DOS prompt, enter SETUP.EXE followed by -.
Manual PCI-DIO-24DH
15