Resolute® Acclaim Woodburning Stove

Accessories are available for use as wall pass- throughs. If using one of these, make sure it has been tested and listed for use as a wall pass-through.

U.S.: In the United States, the National Fire Protec- tion Association (NFPA) has established guidelines for passing chimney connectors through combus- tible walls. Many building code inspectors follow these guidelines when approving installations.

The following illustration shows one NFPA-recommend- ed method. All combustible material in the wall is cut away a sufficient distance from the single-wall connec- tor to provide the required 12” (305 mm) clearance for the connector. Any material used to close up the open- ing must be noncombustible.

Three other methods are also approved by the NFPA. These are:

•Using a section of double-wall chimney with a 9” (229 mm) clearance to combustibles.

•Placing a chimney connector pipe inside a ven- tilated thimble, which is then separated from combus- tibles by 6” (152 mm) of fiberglass insulating material.

•Placing a chimney connector pipe inside a sec- tion of 9” (229 mm) diameter, solid-insulated, factory- built chimney, with 2” (51 mm) of air space between the chimney section and combustibles.

 

Wall Stud

 

Chimney Con-

 

nector

 

T

 

12” (305mm) of

 

Noncombustible

 

Material

Floor Pro-

 

tection

ST493a

 

Fig. 9 An approved wall pass-through for the United States.

Canada: The Canadian Standards Association has established different guidelines. The illustration below shows one method, in which all combus- tible material in the wall is cut away to provide the required 18” (457 mm) clearance for the connector. The resulting space must remain empty. A flush- mounted sheet metal cover may be used on one side only. If covers must be used on both sides, each cover must be mounted on noncombustible spacers at least 1” (25 mm) clear of the wall. Your local dealer or your local building inspector can provide details of other approved methods of pass- ing a chimney connector through a combustible wall.

In Canada, this type of installation must conform to CAN/CSA-B365, Installation Code for Solid Fuel Burn- ing Appliances and Equipment.

Note: Do not vent your Resolute Acclaim into a factory-built (zero-clearance) fireplace under any circumstances. The Resolute Acclaim has not been specifically tested and listed for this type of in- stallation. These appliances and their chimneys are specifically designed as a unit for use as fireplaces. It may void the listing or be hazardous to adapt them for any other use.

do not connect the RESOLUTE ACCLAIM to any air distribution duct or system.

18” (457 mm) clear- ance all around the pipe

T

T

 

Flush

Mounted

ST494a

Fig. 10 An approved wall pass-through for Canada.

2000893

Page 7 Page 9
Page 8
Image 8
Acclaim Lighting 2490 installation instructions An approved wall pass-through for the United States
Page 7 Page 9

2490 specifications

Acclaim Lighting has made a significant impact in the world of architectural and entertainment lighting with innovative solutions that cater to a wide array of applications. One of their standout products is the Acclaim Lighting 2490, a lighting fixture that exemplifies cutting-edge technology and high performance.

The Acclaim Lighting 2490 is primarily designed for use in both indoor and outdoor settings. Its robust construction ensures durability against various weather conditions, making it an ideal choice for architectural lighting, theatrical productions, and even large-scale events. One of the standout features of the 2490 is its high lumen output, allowing it to provide bright, effective illumination in any scenario.

Equipped with advanced LED technology, the 2490 offers exceptional energy efficiency without compromising brightness. The fixture utilizes high-quality LEDs that not only extend the lifespan of the unit but also minimize heat generation, making it a sustainable choice for long-term use. This energy-efficient operation translates to lower energy costs and reduced environmental impact.

The Acclaim Lighting 2490 boasts versatile color rendering, with RGBW capabilities that allow users to create a wide palette of colors. This feature is particularly beneficial for event lighting and architectural applications where mood and aesthetics play a crucial role. Additionally, the fixture supports DMX control, making it easy to integrate into existing lighting setups and enabling synchronized light shows or dynamic lighting transitions.

Another noteworthy characteristic of the 2490 is its adjustable beam angle. This adaptability provides users with the flexibility to focus light where it's needed most, whether for highlighting architectural features or creating immersive environments for theatrical performances.

Built with user-friendliness in mind, the Acclaim Lighting 2490 includes options for easy mounting and installation. Its lightweight design coupled with intuitive controls ensures that both professional lighting technicians and newcomers can operate it with ease.

Overall, the Acclaim Lighting 2490 stands as a testament to the brand's commitment to quality and innovation in lighting technology. With its combination of efficiency, versatility, and durability, it offers a comprehensive solution for a wide array of lighting needs, making it a preferred choice among lighting designers and professionals alike.
Top Page Image Contents