Acclaim Lighting X-FADE-6 Technical Specifications, Assigning Scenes Fade time, Set OFF Fade time

3.2 Assigning Scenes Fade time

3.2.1Press and hold the "Scene" button to select the Scene where you wish to assign fade time to, until its indicator is flashing.

3.2.2Keep and hold the selected "Scene" button, and at the moment adjust the "Master control fader" all ways up to 600s to set desired fader level.

3.2.3Once you're satisfied with the setting, release the selected "Scene' button to store it. All LED indicators will flash repeatedly 3 times.

3.2.4To assign fade time for additional scenes, repeat Step3.2.1 through 3.2.3.

Note: Once you've stored fade time for all of your scenes, please flip the "Master Control Fader" back to the initial position.

3.3 Set OFF Fade time

3.3.1Recording Scene mode enables.

3.3.2Adjust the "Master Control Fader" all ways up to 600s to set the desired level.

3.3.3Once you're satisfied with the setting, tap the "OFF" button to store it. All LED indicators will flash repeatedly 3 times.

3.3.4Exit the Recording Scene mode.

3.4 Set the Total Number of Controllable Channels

3.4.1Disconnect the main power of X-Fade-6.

3.4.2Select the channel total number which you wish to control. When using the "Channel Fader 1", the channel total which you wish to control is "1"; when using the "Channel Fader 2", the channel total which you wish to control is "2"; and in the function, the channel total which you wish to control is up to "6".

3.4.3Should adjust the "Master Control Fade" over 5 position when selecting the channel number.

3.4.4Keep and hold the "OFF" button, and power the X-Fade-6 on, all LED indicators will come on. Release the "OFF" button, and all LED indicators will flash repeatedly 3 times.

3.5 Playback Scenes

3.5.1Only stored scenes can be playback.

3.5.2Directly tap the "Scene" button to select the scene which you wish to playback.

3.5.3Users can use the Infrared Remote to operate your X-Fade-6.

3.6 Restore Scene

3.6.1Disconnect the main power of the X-Fade-6.

3.6.2Keep and hold down the "Scene1" button which you wish to restore , and power the main power of the X-Fade-6 on, until all Scenes' LED indicators will illuminate. Then release the "Scene" button to restore, and all Scenes' LED indicators will flash repeatedly 3 times

4.Technical Specifications

Power Requirement Connection Housing

Ingress Protection Rating Control Protocol Listing

Operation temperature Dimensions

Weights

12VDC

RJ45 interface Polycarbonate IP20 DMX-512 (1990) CE certified

-10 degC to +50 degC US:112(L) x 70(W) x 45(H)mm EU: 86(L) x 86(W) x 45(H)mm 200g

Dimension

70mm86mm

112mm 86mm

EU version

US version

-Page 2-