|
| Troubleshooting | 5 |
|
|
| |
|
|
|
|
Shredder Does Not | Power Cord Disconnected. | Connect Power Cord | |
Operate, No Indication Of | Powerswitch Defective | Replace Power Switch | |
Power | |||
|
| Main Board Defective | Replace Main Board |
Shredder Does Not | Shredder Head Not | Reposition Shredder Head |
Operate, With Indication | Installed Properly |
|
Of Power Present | Cabinet Door Open | Close Door |
| ||
| Shred Bag Full | Empty Bag |
| Motor Thermal Cut | Allow Motor To Cool |
| Triggered |
|
| Door Switch Defective | Replace Door Switch |
Shredder Does Not | Defective Capacitor | Replace Capacitor |
Operate, (When Paper Is | Motor Defective | Check Motor Input Voltage |
Present In The Throat) | ||
|
| Replace Motor If Necessary |
| Emitter/Receiver Defective | Replace If Necessary |
| Main Board Defective | Replace If Necessary |
Shredder Runs | Dust Or Scratch On | Clean Or Replace |
Continuously | Emitter/Receiver |
|
| Defective Control Board | Replace If Necessary |
| Emitter/Receiver Defective | Replace If Necessary |
Sheet Capacity | Dry Blades | Lubricate Cutters |
Diminished | ||
| Dull Cutters | Replace Cutters |
| Worn Bearings | Replace Bearings |
