| Troubleshooting | 8 |
Necessary Tools
1.Adjustable wrench
2.#2 Phillips Screwdriver
Disassembly of the shredder is described in the following steps.
Top Housing Removal
2 | 2 | 2 |
| ||
|
|
WARNING!
Disconnect the unit from the receptacle before performing any disassembly procedures.
1.Unplug the power cord from the outlet power supply. 2.Open cabinet door and remove the 3 phillip head screws that
secure shredder top cover to cabinet base.
3.Remove the 4 phillip head screws from the back side of the shredder which secures top cover to cabinet base.
4. Lift top cover. Remove and label the 3 cables from control
panel.
3
3
3
Engine Assy. (Cutting Head Assy.) Removal
1
1.Remove the six phillip head screws that secure the main pcb box to the bottom base.
2.Remove pcb box front cover. Unplug and label all wires from main pcb box.
3.Open cabinet door and remove the four (14 mm) hex nuts and two wing nuts from the bottom base of engine (cutting head).
4.Carefully lift out engine ( cutting head ) assy and place place on your work area.
