Makita UC4550A Assembly, Removing or installing sprocket cover, Removing or installing saw chain

(For all models)

		14
	11
	12	13
16		18
		17
		15
014514

1	Rear handle	7	Lever	13	Oil filler cap
2	Switch trigger	8	Adjusting screw/dial	14	Lock-off button
3	Front handle	9	Sprocket cover	15	Chain catcher
4	Front hand guard	10	Rear hand guard	16	Guide bar cover
5	Guide bar	11	Spike bumper	17	Cord hook
6	Saw chain	12	Oil level sight	18	Adjusting screw for oil pump
					(at the bottom)

014375

ASSEMBLY

CAUTION:

•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.

Removing or installing sprocket cover

To remove the sprocket cover, perform the following steps:

(For nut models)

014453

(For lever models)
2		1.	Lever
	1	2.	Sprocket cover
014393

Press and fully open the lever until it stops. Turn the lever counterclockwise.

To install the sprocket cover, perform the above steps in reverse.

Removing or installing saw chain

CAUTION:

•Always wear gloves when installing or removing the saw chain.

Loosen the nut.

9