Accton Technology Specifications, EtherHub-16 Quick Start Guide, Symptom, Causes, Solution

		EtherHub-16 Quick Start Guide
Symptom:	Jabber indicator lights up.
Causes:	Frame received on this port exceeds length threshold for Jabber Lockup Protection.
Solution:	If jabber lockup has occurred, it will be automatically re-enabled when the problem
	is corrected or the port receives a valid data packet. Check for a faulty network
	interface card that has started transmitting data but never stops.
Symptom:	Power indicator does not light up after power on.
Causes:	Defective power supply or attached cable, or a problem at the power source.
Solution:	Check the power source and attached cable. If the problem cannot be resolved, you
	may have to replace your unit’s power supply. Ask for dealer assistance.
Specifications
Transmission Technique		: Baseband
Topology		: Tree, Star, Bus (BNC)
Access Method		: CSMA/CD, 10 Mbps
Standard Conformance		: IEEE 802.3 10BASE-T
Media Supported		: Category 3,4,5 twisted-pair cable
Interfaces		: 16 standard MDI-X RJ-45 ports, 1 MDI RJ-45 daisy-chain port,
		2 AUI ports, 2 BNC ports
Hub-to-Workstation Distance		: 100m max.
DimensionsDimensions		: 442mm x 141mm x 50mm (17.4" x 5.55" x 1.97")
Power Input		: 100-240 (ô10%) VAC
Power Consumption		: 1 Amp max.
Temperature		: 0°C to 80°C (Standard Operating)
Humidity		: 90% (Noncondensing)
Certification		:
Emissions		: FCC Class A
Safety		: UL, CSA, TÜV/GS

6