CheetaHub Power-3008P/3016P
Maximum Current | 0.3ARMS max. @ 110VAC, 0.1ARMS max. @ 240VAC |
Temperature | 0°C to 50°C (32 to 122°F) Standard Operating, |
| |
Humidity | 5% to 95% (Noncondensing) |
Certification | CE Mark |
Emissions | FCC Class A, VCCI Class A, |
| EN55022 (CISPR22) Class A |
Immunity | IEC |
Safety | CSA/NRTL (C22.2.950, UL 1950), |
| TÜV/GS (EN60950) |
| IEC60950 (CB Report) |
Internal Switching Criteria
Network Bridging Function | Filtering, forwarding and learning |
Switching Method | |
Address Table | 1.7K entries |
Queue Buffer | 240K bytes per unit |
Filtering Rate | Line speed |
Forwarding Rate | Line speed |
Troubleshooting
Diagnosing Hub Indicators
The hub can be easily monitored through panel indicators to assist the network manager in identifying problems. This section describes common problems you may encounter and possible solutions.
Symptom: Power indicator does not light up (green) after power on.
Cause: Defective power outlet, power cord, or internal power supply.
Solution: Check the power outlet by plugging in another device that is functioning properly. Check the power cord with another device. If these measures fail to resolve the problem, have the unit's power supply replaced by a qualified Accton distributor.
Symptom: Link indicator does not light up after making a connection.
Cause: Network interface (e.g., a network adapter card on the attached device), network cable, or hub port is defective.
Solution: Verify that the hub and attached device are powered on. Be sure the cable is plugged into both the hub and corresponding device. Verify that the proper cable type is used and its length does not exceed specified limits. Check the adapter on the attached device and cable connections for possible defects. Replace the defective adapter or cable if necessary.
8
