![CE Mark Declaration of Conformance](/images/new-backgrounds/125205/12520537x1.webp)
Fast EtherHub Installation Manual
CE Mark Declaration of Conformance
This is to certify that this product complies with ISO/IEC Guide 22 and EN45014. It conforms to the following specifications:
EMC: | class B |
class A | |
IEC | 4kV CD, 8kV AD |
IEC | 3V/m |
IEC | 1kV - (power line) |
| 0.5kV - (signal line) |
This product complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC.
Safety Compliance
Underwriters Laboratories Compliance Statement
Important! Before making connections, make sure you have the correct Cord Set. Check it (read the label on the cable) against the following specification list.
Operating
Voltage
120 Volts
Cord Set Specifications
UL Listed/CSA Certified Cord Set
Minimum 18 AWG
Type SVT or SJT three conductor cord
Maximum length of 15 feet
Parallel blade, grounding type attachment plug rated 15A, 125V
The unit automatically matches the connected input voltage. Therefore, no additional adjustments are necessary when connecting it to any input voltage within the range marked on the rear panel.
Do not plug a phone jack connector into any of the
17