Fast EtherHub Installation Manual
TROUBLESHOOTING
This chapter contains information to help you solve problems. If these hubs are not functioning properly, make sure they were set up according to instructions in this manual.
If the hubs don’t connect to the network:
➊Check the LINK/ACTIVITY LED lights on the front panel.
If the LINK/ACTIVITY LED isn
t lit, check all connections at the adapter and the hub. Make sure the adapter drivers are loaded.
➋Try another port on the hub.
➌Make sure the cable is installed properly.
The network cable must be securely attached at all connection points. If the cable is properly attached but the problem persists, try a different cable.
❹Turn off the unit
s power, wait a few seconds, and turn it back on.
13
