Distance Setting
Press [RECALL] for 2 seconds to enter setting mode, the unit icon flashes.
DIST KM
{000} 0 0 0. 0 0 0 0: 00' 00" 00
LAP
STOP 0: 00' 00" 00
Press [START] to toggle between KM and MILE. To select the following digits, press [RESET]. The far right digit will blink and you can set the distance from the least significant digit to the most significant digit. The distance can be set in the range 0.000 to 1999.999 km (or ML). Press [RECALL] OR [MODE] to exit from the setting mode.
As an example, the distance is set at 400m.
| DIST KM |
{000} | 0. 4 0 0 |
0: 00' 00" 00
LAP | 0: 00' 00" 00 |
STOP | |
|
Speed Mode Running
Press [START] to start the Speed timer. The "STOP" indicator is OFF. The maximum time can be up to 19 hr. 59 min. 59.99 sec.
| DIST KM |
{000} | 0. 0 0 0 |
0: 00' 00" 00
LAP | 0: 00' 05" 35 |
RUN | |
|
While the timer is running, press [LAP/SPLIT] to record the lap time and the corresponding speed (in km/hr or mph) will be displayed on the upper line. The lap counter (shown on the upper left corner) will advance by one.
16
| DIST KM |
{001} | 2 5. 7 6 0 |
0: 01' 05" 35
LAP | 0: 01' 05" 35 |
RUN | |
|
