To stop the chronograph, press [STOP]. The indicator "STOP" will come on again to show the status. Press [RESET] as the stopwatch stops to reset the stopwatch while the split/lap times will be kept in memory. When the stopwatch starts running from reset state, all the lap memories will be cleared.
Decimal Timing (AE790M500DEC model only)
1.The DM Model can operate as a normal 1/100 second chronograph as well as decimal minute, decimal second, and decimal hour chronograph.
As you press [MODE] to enter the chronograph mode, the normal 1/100 second chronograph display will be shown.
{000} 0: 00' 00" 00
SPLIT | 0: 00' 00" 00 |
LAP | |
STOP | 0: 00' 00" 00 |
|
Reset the chronograph to 00, then press [LAP/SPLIT] to go to the second chronograph mode. (1/100s). You will note the change by looking at the bottom of the display to see 1/100s.
{000} 0 0 0 0 0. 0 0
SPLIT | 0 0 0 0 0. 0 0 |
LAP | |
STOP | 0 0 0 0 0. 0 0 |
| |
| 1/100S |
Change to the 1/1000 of a minute chronograph mode by pressing [LAP/SPLIT] again. (1/1000M)
{000} 0 0 0. 0 0 0
SPLIT | 0 0 0. 0 0 0 | |
LAP | ||
STOP | 0 0 0. | 0 0 0 |
| ||
| 1/1000M | |
Go to the 1/10,000 hour chronograph by pressing [LAP/SPLIT] again.(1/10,000H)
{000} 0. 0 0 0 0 0
SPLIT | 0. 0 0 0 0 0 | |
LAP | ||
STOP | 0. | 0 0 0 0 0 |
| ||
|
| 1/100000H |
7
