Accusplit AX602 Standard Measurement, Stop, Accumulated Elapsed Time Measurement

•“Split time” refers to an elapsed time required to cover a distance from the start to a given point.

•“Lap time” refers to an elapsed time required to cover a given section of the whole distance.

	Lap time
Start
		Split time
1. STANDARD MEASUREMENT
START	STOP	RESET
	A	A B

Hour	Seconds
Minutes		1/100 seconds

8

2. ACCUMULATED ELAPSED TIME MEASUREMENT

START STOP RESTART

AA

RESETSTOP

BA

Restart and stop of the stopwatch can be repeated by pressing “A”.

9

3. SPLIT TIME/LAP TIME MEASUREMENT		SPLIT-LAP 2
		B
START	SPLIT-LAP 1	Split time
A	B
		Lap time
		Accumulated
		elapsed time
	Split/lap number	The split/lap time can
		be measured repeated
RESET	STOP	by pressing “B”.
B	A	SPLIT-LAP 8
		B

Finish time

Note: When the number of stored measurements exceeds 90, flashing “FULL” appears, and when it exceeds 100, a warning sound starts beeping.

4. HOW TO USE THE MEMORY FUNCTION

The stopwatch can store up to 100 split times, 100 lap times and total elapsed time. They are automatically entered into the memory.

• With each press of “C”, the time stored is recalled. The time can be recalled successively by keeping the button pressed.

CCC

“RECALL” more

C

BA

Reset to “00” Finish time

•To stop the recall of the stored data, press “A”, “B”, or “D”. The measurements when the stopwatch was stopped will be shown. Then, press “B” to reset the digits to “00”.

10 11