Accusys ACS-77100 - page 20

http://www.accusys.com.tw 19

User’s Manual

4.1.3. Initialization Messages

LCD Display Message

Create a new RAID.

Create New RAID?

No

(

Yes

)

New array being created.

RAID INIT XX.X %

Total: XXXX GB

RAID Initialization completed successfully.

RAID Init 100 %

XXXX GB INIT OK!

LCD Display Message

Disk X failed during the initialization. The initialization

cannot proceed.

RAID INIT Failed

DX offline

Too many bad sectors in Disk X, initialization cannot

proceed.

RAID INIT Failed

DX Bad sectors

4.1.4. System Ready Messages

LCD Display Message

ACS-77100 is ready for use.

RAID Box

Read

y

hh:mm

Contents

Main ACS-77100 RAID controller User Manual Page Page Preface Notice About This document Symbols used in this document 1. Introduction to the ACS-77100 1.1. Overview 1.2. System Structure 1.3. Understanding RAID Levels 1.3.1. RAID 0 (striping) 1.3.2. RAID 10 (striping and mirroring) 1.3.3. RAID 5 (striping with parity) and RAID 5+hot spare 2. Build a RAID Solution 2.1. Hardware Requirement: 2.2. LCD Panel Operations 3. Set up the RAID solution 3.1. Setting the RAID Level 3.1.1 RAID Level configurations 3.2. Creating an Array 3.2.1 Enable/Disable Over 2TB capacity 3.2.2 Creating an Array 3.3. Setting the Time and Date by LCD 3.4. Connecting ACS-77100 to the Host computer 3.5. Formatting and Partitioning the ACS-77100 3.5.1. Windows Users Page 3.5.2. Formatting drive over 2TB capacity on Windows Vista 4. Management Page Page 4.2. StorConn GUI introduction Temperature!! XXC > 50C Disk X fail Fan Fail XXXX r p 4.2.1. RAID status monitoring window 5. Update Firmware 5.1. Firmware updating steps Page Page 6. Trouble Shooting 7. FAQ 8. Contact Accusys Accusys, Inc. Accusys U.S.A., Inc. Accusys China, Inc. Accusys EU B.V Accusys Korea, Inc.