Accusys ACS-77100 - page 26

http://www.accusys.com.tw 25

User’s Manual

7. Type in the command “download” to go to the firmware download mode, then type “1” to

download code (Firmware or Bootcode).

>>> download

restart … 01 GPIO 01 AAA 01 01

========= 76 Download Mode =========

Enter ‘1’ to Download Code (Firmware, Bootcode)

‘ESC’ exit

‘r’ reset

--------------------------- version: Boot ---- 13 (a) ---- 03 Downloading Code!

Flash t

yp

e: SST39VF040

8. Locate the updates firmware file to send. For HyperTerminal, go to the Transfer menu and

select Send Text File.

9. Send the firmware file as a text file. The file will start to download.

Caution

Do not turn off the system or interrupt program

during firmware-updating procedure.

10. When the file has been downloaded, after ACS-77100 restarted, the firmware-updating

procedure is finished.

Contents

Main ACS-77100 RAID controller User Manual Page Page Preface Notice About This document Symbols used in this document 1. Introduction to the ACS-77100 1.1. Overview 1.2. System Structure 1.3. Understanding RAID Levels 1.3.1. RAID 0 (striping) 1.3.2. RAID 10 (striping and mirroring) 1.3.3. RAID 5 (striping with parity) and RAID 5+hot spare 2. Build a RAID Solution 2.1. Hardware Requirement: 2.2. LCD Panel Operations 3. Set up the RAID solution 3.1. Setting the RAID Level 3.1.1 RAID Level configurations 3.2. Creating an Array 3.2.1 Enable/Disable Over 2TB capacity 3.2.2 Creating an Array 3.3. Setting the Time and Date by LCD 3.4. Connecting ACS-77100 to the Host computer 3.5. Formatting and Partitioning the ACS-77100 3.5.1. Windows Users Page 3.5.2. Formatting drive over 2TB capacity on Windows Vista 4. Management Page Page 4.2. StorConn GUI introduction Temperature!! XXC > 50C Disk X fail Fan Fail XXXX r p 4.2.1. RAID status monitoring window 5. Update Firmware 5.1. Firmware updating steps Page Page 6. Trouble Shooting 7. FAQ 8. Contact Accusys Accusys, Inc. Accusys U.S.A., Inc. Accusys China, Inc. Accusys EU B.V Accusys Korea, Inc.