NetWare

4.Follow the standard NetWare 5.0 upgrade or installation procedure, as described in the NetWare 5.0 documentation.

•MDAC.HAM will be installed from the C:\NWUPDATE directory.

5.Return to the driver summary by pressing the arrow keys and select the option to continue.

6.NetWare 5.0 will continue the installation.

7.Watch for another status screen that displays the storage devices (i.e., SCSIHD.CDM and SCSICD.CDM) and the network drivers:

•Select Modify

•Select Storage Devices

•Press the <Insert> key

•Select NWASPI.CDM (this driver is required to load GAM)

•Press <Enter>

•Return to the driver summary by using the arrow keys.

NetWare 5.0 Bootable CD-ROM

In order to boot from the NetWare 5.0 CD-ROM, you must enable CD-ROM Boot Support in the BIOS setup program of the device that controls the CD-ROM drive.

If your bootable CD-ROM drive is connected to a Mylex controller, follow the steps below to enable CD-ROM boot support.

1.Insert the NetWare 5.0 CD-ROM.

2.Power on or reboot the system.

After the Mylex Controller BIOS banner comes up, you will see the following statement:

Press <ALT-M> for BIOS options

3.Press <ALT-M>immediately.

The BIOS options menu will be displayed.

N

2E

T

W

A

R

E

Manual No. 775079

2-7