NetWare

1.The appropriate drivers should be loaded before trying to access the non-disk devices.

2.Load the following drivers to use a CD-ROM under NetWare 5.0 (cdrom is supplied by Novell):

☛Note

mdac.ham and scsicd.cdm are usually loaded in the startup.ncf file.

:load mdac.ham

:load scsicd.cdm

:load cdrom

After the CD-ROM is mounted, the volume on the CD-ROM can be mapped from any workstation and accessed.

Installing the Mylex Disk Array Controller into an Existing NetWare 5.0 System

If NetWare 5.0 is already installed and you wish to add a Mylex Disk Array Controller later, the controller will be a secondary (non-bootable) controller. After installing the controller hardware and configuring a disk array, follow the procedure below to add the necessary controller drivers.

1.Copy NWASPI.CDM (for GAM support).

•Copy C:\NWSERVER\DRIVERS\NWASPI.CDM to the directory named, C:\NWSERVER.

•In the C:\NWSERVER\STARTUP.NCF file add LOAD NWASPI.CDM with the other LOAD XXXX.CDM

2.With NetWare Server 5.0 loaded and running, load the NetWare program by typing the following at the console prompt:

: load nwconfig and press <Enter>.

3.Choose “Driver Options” in the Installation Options menu.

4.Choose “Configure disk and storage device drivers” in the Driver Options menu.

5.Choose “Select an additional driver” in the Additional Driver Actions menu.

N

2E

T

W

A

R

E

Manual No. 775079

2-9