Windows NT

Installing the Mylex Disk Array Controller into an Existing Windows NT 4.0 System

If Windows NT 4.0 is already installed and you wish to add a Mylex Disk Array Controller later, the controller will be a secondary (non-bootable) controller. After installing the controller hardware and configuring a disk array, follow the procedure below to add the necessary controller drivers.

1.Make sure Windows NT 4.0 is up and running.

2.Click Start, and select Settings->Control Panel within the Start menu (Figure 3-1).

Figure 3-1. Open the Windows NT 4.0 Control Panel

3.From the Control Panel window, double-click the SCSI Adapters icon (Figure 3-2).

W

3 I

N

N

T

Manual No. 775079

3-5