Installing the Mylex Disk Array Controller as the Primary Windows 2000 Controller
Upgrading the Windows 2000 Driver to the Current Mylex Driver
WARNING
In order to avoid a system failure, you must uninstall GAM components before you begin the Windows 2000 upgrade.
This condition occurs when:
•Windows 2000 operating system is already installed, and
•All hardware has already been installed and configured, and
•You only need to upgrade the embedded Windows 2000 driver. Go to “Updating the Mylex Controller Driver” on page
Upgrading Windows NT 4.0 to Windows 2000
WARNING
In order to avoid a system failure, you must uninstall GAM components before you begin the Windows 2000 upgrade.
This upgrade requires that your Windows NT 4.0 contains Service Pack 4 or higher. Please refer to your Microsoft documentation for additional information
Please study the options below and select the one that meets your upgrade requirements.
Windows NT 4.0 with a Mylex controller
If you are running a system with only Windows NT 4.0 and a Mylex controller:
•Complete the Windows 2000 upgrade, then
•Go to “Updating the Mylex Controller Driver” on page
PCI Disk Array Controller Drivers Manual |