Chapter 5

SCO OpenServer

Overview

This chapter describes installation procedures and the functionality of the Mylex Disk Array Controller drivers for SCO OpenServer Release 5.0.x. The software is provided on the appropriate Software Kit distribution CD-ROM with a file to create a diskette.

This chapter assumes that the user has properly completed the hardware installation, PCI configuration, and the Drive Array Configuration. If you have not done so, please refer to the corresponding chapters and complete the configuration before proceeding with the driver installation.

Installing SCO UNIX with the mdac driver follows the standard SCO UNIX installation with the addition that during the installation, you need to insert the appropriate SCO UNIX driver diskette when prompted.

5S

C

O

Manual No. 775079

5-1