Overview
Special Notes
•In order for UnixWare 2.1.2 and below to detect a Mylex multifunction controller such as a DAC960PG, DAC960PJ, DAC960PR, DAC960PT, etc., UnixWare 2.1.2 and below must have a “multifunction PCI Driver” loaded.
•In order to install a Mylex multifunction controller, a driver diskette must be created from the
•If using a Mylex multifunction controller as a primary controller1, please refer to “Installing the Mylex Disk Array Controller as the Primary UnixWare Controller with UnixWare 7.x/2.1.3” on page
•If using a Mylex multifunction controller as a secondary controller2, please refer to “Installing the Mylex Disk Array Controller as the Secondary UnixWare Controller with UnixWare 7.x/2.1.3” on page 6- 5.
•If using a Mylex multifunction controller as a primary controller, please refer to “Installing the Mylex Disk Array Controller as the Primary UnixWare Controller with UnixWare 2.1.2” on page
•If using a Mylex multifunction controller as a secondary controller, please refer to “Installing the Mylex Disk Array Controller as the Secondary UnixWare Controller with UnixWare 2.1.2” on page
1.“Primary” indicates that a controller’s storage device will be the boot device for UnixWare installation.
2.“Secondary” indicates that the controller is not the bootable device for the UnixWare operating system.
U
N
6 I
X
W
A
R
E
Manual No. 775079 |