Acer 2100, MS2154W manual FCC RF safety requirement, Exposure of humans to RF fields RSS-102

English

68 Appendix B Regulation & safety notices

in the country of use. For further information, please contact local office in the country of use.

The FCC RF safety requirement

The radiated output power of Wireless LAN Mini-PCI Card and Bluetooth card is far below the FCC radio frequency exposure limits. Nevertheless, the TravelMate series shall be used in such a manner that the potential for human contact during normal operation is minimized as follows.

1Users are requested to follow the RF safety instructions on wireless option devices that are included in the user’s guide of each RF option device.

2An improper installation or unauthorized use may cause harmful interference to radio communications. Also any tampering of the internal antenna will void the FCC certification and your warranty.

Canada - Low power license-exempt radiocommunication devices (RSS-210)

aCommon information

Operation is subject to the following two conditions:

1.This device may not cause interference, and

2.this device must accept any interference, including interference that may cause undesired operation of the device.

bOperation in 2.4 GHz band

To prevent radio interference to the licensed service, this device is intended to be operated indoors and installed outdoors is subject to licensing.

Exposure of humans to RF fields (RSS-102)

The TravelMate series employs low gain integral antennas that do not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site at www.hc-sc.gc.ca/rpb.