66 Chapter 3
Disassembling the Main Unit

Removing the CPU Heat Sink Plate

1. See “Removing the Battery Pack” on page 49
2. See “Removing the Hinge Caps” on page 56
3. See “Removing the Middle Cover” on page 56
4. See “Removing the Keyboard” on page 57
5. Remove two screws from the CPU heat sink plate.
6. Lift the CPU heatsink plate from the main unit.

Removing the RTC Battery

1. See “Removing the Battery Pack” on page 49
2. See “Removing the Hinge Caps” on page 56
3. See “Removing the Middle Cover” on page 56
4. See “Removing the Keyboard” on page 57
5. See “Removing the CPU Heat Sink Plate” on page 67
6. Disconnect the RTC cable and then remove the RTC battery gently.

Removing the Touch Pad Frame

1. See “Removing the Battery Pack” on page 49
2. See “Removing the Hinge Caps” on page 56
3. See “Removing the Middle Cover” on page 56
4. See “Removing the Keyboard” on page 57
5. First, disconnect the touch pad cable from the main board.
Download Free Service Manual at http://printer1.blogspot.com