44 Chapter 3
NOTE: When attaching the antenna back to the WLAN board, make sure the cable are arranged properly.
Removing the Optical Drive Module
1. See “Removing the Battery Pack” on page 36.
2. See “Removing the SD Dummy Card” on page 37.
3. See “Removing the DIMM Module” on page 38.
4. See “Removing the Back Cover” on page 39.
5. See “Removing the Hard Disk Drive Module” on page 40.
6. See “Removing the WLAN Modules” on page 43.
7. Use a screw driver to push out the locker bracket of the optical drive (ODD) module. Slowly pull out the
ODD module from the ODD drive bay.