6-8User’s Manual
6.4 System Security
System Security
Disk Drive Control
Floppy Disk Drive ------------- [Normal]
Hard Disk Drive --------------- [Normal]
System Boot Drive ------------- [Drive A Then C]
CD-ROM Bootable --------------- [Disabled]
On Board Communication Ports
Serial Port 1 Base Address ---- [3F8h(IRQ 4)]
Parallel Port Base Address ---- [378h(IRQ 7)]
Parallel Port Operation Mode -- [Standard and Bidirectional]
ECP DMA Channel -------------- [0]
Setup Password ------------------- [None]
Power On Password ---------------- [None]
CardBus Support ------------------ [Enabled]
↑↓=Move Highlight Bar, →←=Change Setting, F1=Help, Esc=Exit

6.4.1 Floppy Disk Drive Control

This parameter allows you to enable or disable the read/write functions of

the floppy drive. The following table summarizes the available options.

Table 6-2 Floppy Disk Drive Control Settings

Setting Description
Normal
(default) Floppy drive functions normally
Write Protect
Boot Sector Disables the floppy drive write function on a diskette’s boot
sector. This option is for operating systems that access the
floppy drive 100 percent via BIOS only.
Disabled Disables the floppy drive