Setup 6-15
6.5 Power Management Settings
Besides accessing this screen from POST (F2), you can also press Fn-F6
during runtime (system operation) to access this section of the BIOS Utility.
Power Management Settings
Power Management Mode ------------- [Enabled]
Display Standby Timer ------------- [ 1] Minute(s)
Hard Disk Standby Timer ----------- [ 1] Minute(s)
System Sleep Timer ---------------- [ 3] Minute(s)
System Sleep Mode ----------------- [Hibernation]
System Resume Timer Mode ---------- [Disabled]
System Resume Date ---------------- [--/--/----]
System Resume Time ---------------- [--:--:--]
Modem Ring Resume On Indicator ---- [Enabled]
Battery-low Warning Beep ---------- [Enabled]
Sleep Upon Battery-low ------------ [Enabled]
↑↓=Move Highlight Bar, →←=Change Setting, F1=Help, Esc=Exit

6.5.1 Power Management Mode

With enabled, all the power management timers take effect unless
specifically disabled by the user. Select [Disabled] to turn off all the
timers. The default setting is [Enabled].
You cannot disable this parameter in BIOS Utility if APM is
installed under DOS, Windows or Windows 95. To disable
APM, type Power Off under DOS, or disable the Power icon
in the Windows Control Panel.