Chapter 2 35

Startup Configuration

The Startup Configuration screen contains parameter values that define how your computer behaves on

system startup.

The following table describes the parameters in this screen. Settings in boldface are the default and

suggested parameter settings.
Parameter Description Options
CPU Speed Set CPU high speed or low speed. High or Low
Legacy Diskette A Help: Selects floppy type. Note that 1.25MB 3 1/2”
references a 1024 b yte/sector Japane se media
format. The 1.25MB, 3 1/2 ” diskette require s a 3-Mode
floppy-disk drive.
Options: 1.44/1.25MB 3 1/2”
or Disabled
Primary Master Show Primary Master HD size.
User can enter submenu to set some detail functions
Auto or None or User or CD-
ROM or ATAPI Removable or
IDE Removable
Secondary Master Show Secondary Master Device Status.
User can enter submenu to set some detail functions.
Auto or None or User or CD-
ROM or ATAPI Removable or
IDE Removable
I/O Device Confi guration Ent er submenu to set onboard device conf iguration
Help: Pheripheral Config uration.
PCI IRQ Routing Set Default IRQ o f PCI device.
Help: Menu used to setting IRQ for PCI Devices.
USB Host Controlle r Set Enabled or Disabl ed the USB hardware
Help: Disabled resources will be freed up for other
uses.
Enabled or Disabled

PhoenixBIOS Setup Utility

Information Main Advanced Security Boot Exit
Item Specific Help
CPU Speed [High]
Legacy Diskette A: [1.44/1.25MB 3 ½”]
>Primary Master [TOSHIBA MK2018GAP-(PM)]
>Secondary Master [MATSHITADVD-ROM SR-81]
>I/O Device Configuration
>PCI IRQ Routing
USB Host Controller: [Enabled]
USB BIOS Legacy Support: [Enabled]
Temporary solution
F1 Help "#$Select Item -/+ Change Values F9 Setup Defaults
Esc Exit %&
%&%&
%& Select Menu Enter Select > Sub Menu F10 Save and Exit