34 Chapter 2
Boot Display Set the display output device on bo ot up.
Help: Set the display out put device on boot up.
When set to Auto, the compu ter automatically determine s the display
device. If an external disp lay device (e.g., monitor ) is connected, it
becomes the boot display. When set to Both , the computer outputs to both
the LCD and the external disp lay if one is connected.
Option: Both or Auto
Screen Expansion Options: Enable or Disable.
Help: Options: Enable or Disable.
QuickBoot Mode Options: Enable or Disable
Help: Allow the system t o skip certain tes ts while booting. Th is will
decrease the time needed to boot the system.
Boot-time Diagnostic Screen Options: Enable or Disable
Help: Display the diagnostic screen during boot.
Boot on LAN Options: Enable or Disable.
Help: When set to enabled, system will boot on LAN.
Notice: Need to re start system for enabling Boot-on-LAN function.
Hotkey Beep Options: Enable or Disable
Help: Enable or disable hotkey beep.
Auto Dim Optio ns: Enable or Disable
Help: The system will support an automatic dim in of the LCD backlight
when the AC power is NOT available (running on battery power).
F12 Multi-Boot O ptions: Enable or Disable.
Help: Users could choose if to display ‘Fn-F12 for multi-boot’ message
during post
Parameter Description