4-16 EXTENSA 700/710 Service Guide

Running PQA Diagnostics Program

Note: Before running PQA Diagnostic Program, make sure that the write

enable tab of the Diagnostic Program Diskette is set to enable.

Press -> or <- to move around the main menu. Press Enter to enable the
selected option. The main options are Diag, Resoult, SysInfo, Option and
Exit.
The Diag option lets you select testing items and times.
The following screen appears when you select Diag from the main menu.
This screen allows you to specify the number of tests to perform. The options
are as follows:
Manual Test Performs a single test and Manual checks the selected test
items in sequence.
PQA Vx_x xx-xx-xx
Diag Resoult SysInfo Option Exit
PQA Vx_x xx-xx-xx
Diag Resoult SysInfo Option Exit
Diag
MANUAL TEST
AUTO TEST
700SG-4.fm Page 16 Thursday, May 28, 1998 1:13 PM