38 System Utilities
Power Management
Power Management is used to set various settings related to power
management.
This includes the following power-saving-related features:
Item Description
Enable modem ring
resume on indicator Select to allow the computer to wake up from Standby
mode when an incoming modem ring is detected.
Enable wake on LAN Select to allow the computer to wake up from Standby
mode by a remote computer.
Enable battery low
warning beep Select to allow the computer to give off warning beeps
when the computer runs low on battery.
Enable sleep upon
battery low Select to allow the computer to enter Standby or
Hibernation mode when the computer runs low on
battery.
Enable system resume
timer Select to set the system resume timer which allows the
computer to wake up from Standby mode if the resume
timer is set and matched.
Click the System Resume Timer button to set it.
720.book Page 38 Saturday, March 6, 1999 10:00 AM