Chapter 2 51
Power
The Power Saving screen contains parameters that are related to power-
saving and power management.
The table below describes the parameters in this screen. Settings in boldf ace
are the default and suggested parameter settings.
Note: If your system has ACPI, all power management functions are
taken care of by Windows 98.
Parameter Description
LCD backlight
Time-out Sets the time-out value before the display enters power
saving mode.
Options: Disabled or time values
Hard Disk Time-
out Sets the time-out value before the hard disk enters power
saving mode.
Options: Disabled or time values
Standby Time-
out Sets the time-out value before the computer enters Standby
mode.
Options: Disabled or time values
S2D Time-out Sets the time-out value before the computer enters
Hibernation mode.
Options: Disabled or time values
Resume on LAN
access When enabled, the computer resumes operation when
accessed via LAN using a remote computer.
Options: Disabled or Enabled
720.book Page 51 Saturday, March 6, 1999 10:00 AM