3 Setting up your computer
34
Connecting the power cable
Caution: Before you proceed, check the voltage range in your
area. Make sure that it matches your computer’s voltage setting.
If they don’t match, change your computer’s voltage setting
according to your area’s voltage range.
Set the voltage selector switch to the voltage range applicable to your
area (a). Plug the power cable into the power cable socket located on
the rear panel of your computer (b). Then plug the other end of the
power cable into a power outlet (c).
VT7500series_EN.book Page 34 Tuesday, April 16, 2002 11:42 AM