69
The table below describes the parameters in this screen. Settings in
boldface are the default and suggested parameter settings.
Notes:
When you are prompted to enter a password, you have three tries
before the system halts.
Dont forget your password. If you forget your password, you
may have to return your notebook computer to your dealer to
reset it.

Setting a password

Follow these steps:
1Use the and keys to highlight the Set User Password parameter
and press the Enter key. The Set Password box appears:
2Type a password in the Enter new password field. The password
may consist of up to eight alphanumeric characters (A-Z, a-z, 0-9).
Important: Be very careful when typing your password because
the characters do not appear on the screen.
Retype the password in the Confirm new password field.
Parameter Description
User Password Shows the setting of the user password.
Options: Clear or Set
Set User Password Press Enter to set the user password. When set, this
password protects the BIOS Setup Utility from
unauthorized access.
Password on boot When enabled, the user password protects the
computer from unauthorized access during boot up.
Options: Disabled or Enabled
Set Password
Enter new password:
Confirm new password:
[ ]
[ ]
TMa550.book Page 69 Wednesday, October 3, 2001 10:57 AM