Connecting the devices
Caution: Make sure that the computer and the monitor are both disconnected from the power supply.
1Power cord
2VGA cable
3
4Audio cable
5Power switch
Attach the monitor to the power cord, and then insert the power cord into a properly grounded electrical socket.
Connect the signal cable to the VGA input socket of the monitor, and connect the signal cable to the VGA output socket of the graphics card on the computer. Then tighten the thumbscrews on the connector.
Connect the signal cable to the
Connect the audio input socket (AUDIO IN) of the LCD monitor and the computer by means of the audio cable.
On / off
WARNING!
Check the VGA card of your computer. Make sure the shape of the plug matches the shape of the socket it is inserted into. Also check that none of the pins are bent or otherwise damaged.
VGA
6