Acer AL2023 Adjusting display settings, Switching the power, External controls

Switching the power

First, switch on the hard-switch on the backside of monitor, then turn on PC and power button on monitor’s control panel. When you see the LED on the power button go green, this indicates the computer is ready for use. Allow about 10 seconds for the video signal to appear. If you do not see the green light on the power button or a video signal, check the connections.

Adjusting display settings

External controls

1		Auto
2/3	</>	Minus / Plus
4		OSD
		functions
5		Power

If the OSD is active, press Auto to exit a selection in the OSD. If the OSD is inactive, press Auto and the monitor will automatically optimize the position, focus, and clock of your display.

If the OSD is active, press Minus or Plus to toggle between the OSD options. If OSD is inactive, press Minus or Plus to adjust the volume.

Press to view the OSD. Press again to enter a selection in the OSD.

Power on/off

Green: power on

Orange: in sleep mode

7