9

Restore from backup

Users can restore backup previously created (as stated in the Create backup section) from hard drive, CD, or DVD.

1Boot to Windows XP.

2Press <Alt>+<F10> to open the Acer eRecovery utility.

3Enter the password to proceed. The default password is six zeros.

4In the Acer eRecovery window, select Recovery actions and click Next.

5Select the desired restore action and follow the onscreen instructions to complete the restore process.

Note: The "Restore C:" item is enabled only if there is a user backup stored on the hard drive (D:\). Please refer to the Create backup section.

Create factory default image CD

When the System CD and Recovery CD are not available, you can create them by using this feature.

1Boot to Windows XP.

2Press <Alt>+<F10> to open the Acer eRecovery utility.

3Enter the password to proceed. The default password is six zeros.

4In the Acer eRecovery window, select Recovery settings and click Next.

5In the Recovery settings window, select Burn image to disc and click Next.

6In the Burn image to disc window, select 01. Factory default image and click Next.

7Follow the instructions on screen to complete the process.

Re-install bundled software without CD

Acer eRecovery stores pre-loaded software internally for easy driver and application re-installation.

1 Boot to Windows XP.

English

Page 13
Image 13
Acer Aspire T630 manual Restore from backup, Create factory default image CD, Re-install bundled software without CD