Basic connections
Connecting the power cord
1 Connect the AC cord into the AC input on the back of the set.
2 Connect the plug to the wall outlet as shown.
Setting up the remote control
1 Open the cover on the back of the remote unit.
2Insert two AAA batteries (supplied) to match the polarity indicated inside the battery compartment.
Enjoying analog and digital TV
Connecting an antenna/cable | Tuner |
Connect the antenna cable to the appropriate antenna terminal on the back of the TV set as shown below.
Getting started watching your TV
English
1 |
2 |
I |
O |
4 |
1 |
1 Power
a.Turn on the power switch beneath the screen.
b.Press the power button, number keys or channel up / down button on the remote control.
Step 3. Enter the correct time zone using the remote control.
Step 4. Enable or disable daylight saving time.
Step 5. Ensure that your
Step 6. Scan for digital channels and analog channels.
Step 7. Setup is now complete. You are ready to begin
1watching TV.
3
If you leave the setup process before it is complete, you will be given a choice of options:
1.Resume setup
2.Resume setup wizard at next startup
3.Exit and do not remind me
Select an option and press OK to exit.
3Changing channels
2 Setup Wizard | a. Press 0 - 9 on the remote control to select a channel. The | |
| ||
The first time you switch on the TV, the Setup Wizard will | channel changes after 2 seconds. Press ENTER to select | |
the channel immediately. | ||
guide you to complete the language selection and channel | ||
| ||
scanning. | b. Pressing the channel ( CH ) up / down button on the | |
| ||
Press the OK key to begin the setup process. | remote control will also change the channel. |
You can also adjust these settings using the front control panel. Please see "Front panel view" on page 4 for details.
Step 1. Select the setup language you prefer.
Step 2. Please select country.
4Adjusting the volume
Adjust the volume level using the ( VOL ) up/down button on the remote control.
Setup may vary due to local broadcast differences.
