English
Basic connections
Connecting the power cord
1 Connect the AC cord into the AC input on the back of the set.
2 Connect the plug to the wall outlet as shown.
Setting up the remote control
1 Open the cover on the back of the remote unit.
2Insert two AAA batteries (supplied) to match the polarity indicated inside the battery compartment.
Enjoying analog TV
Tuner
Connecting an antenna/cable
Connect the antenna cable to the appropriate antenna terminal on the back of the TV set as shown below.
Getting started watching your TV
1 |
2 |
I |
O |
4 |
1 |
1 Power |
| Step 1. Select the setup language you prefer. | ||
| Step 2. Please select country. | ||
| Step 3. | Ensure that your | |
|
| correctly before proceeding. | |
| Step 4. | Scan for analog channels. | |
1 | Step 5. | Setup is now complete. You are ready to begin | |
| watching TV. | ||
3 |
| If you leave the setup process before it is complete, | |
|
| ||
|
| you will be given a choice of options: | |
|
| 1. | Resume setup |
|
| 2. | Resume setup wizard at next startup |
|
| 3. | Exit and do not remind me |
Select an option and press OK to exit.
a.Turn on the power switch beneath the screen.
b.Press the power button, number keys or channel up / down button on the remote control.
2Setup Wizard
The first time you switch on the TV, the Setup Wizard will guide you to complete the language selection and channel scanning.
Press the OK key to begin the setup process.
You can also adjust these settings using the front control panel. Please see "Front panel view" on page 3 for details.
3Changing channels
a.Press 0 - 9 on the remote control to select a channel. The channel changes after 2 seconds. Press ENTER to select the channel immediately.
b.Pressing the channel ( CH ) up / down button on the remote control will also change the channel.
4Adjusting the volume
Adjust the volume level using the ( VOL ) up/down button on the remote control.
Setup may vary due to local broadcast differences.
