28 EN | TIMER RECORDING |
VCR Plus+®
Timer
Programing
Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.
POWER
Timer recording allows you to program the VCR to automatically record a broadcast at some future time. Up to 8Ê timer recording programs can be made using VCR Plus+ timer programing, Express timer programing (☞ pg. 32) or 24HR quick programing method
(☞Ê pg.Ê 34) as far as a year in advance.
The VCR Plus+ timer programing system eliminates the need to input channel, date, start and stop time data when programing timer recording settings. Simply key in the PlusCode number for the TV broadcast you wish to record and the VCR’s timer will be automatically programed. (The PlusCode programing numbers are the numbers next to the program in most TV listing.)
1 Load a cassette
Make sure the record safety tab is intact. If not, set "REC SAFETY" to "OFF" ( ☞ pg. 37, 41).
●The VCR turns on, and the counter is reset, automatically.
●You can also record onto a cassette without a record safety tab by covering the hole with adhesive tape before inserting the cassette.
DAILY
CANCEL
STOP +/–
27
1 2
4 | 5 |
7 | 8 |
0 |
1
3 |
|
|
| 2 | 34 |
6 |
| |
|
| |
9 |
| WEEKLY |
|
| 8 |
|
| 4 |
|
| 6 |
2Access PlusCode No. screen
Press PROG. on the
Remote.
● The clock must be set to access the
PlusCode No. screen. If you have not set the clock, the Main Menu screen appears after
an error message is displayed. Refer to page 8 for the Plug & Play setting or page 10 for the clock setting procedure.
4
347
| Enter PlusCode number |
|
|
|
|
| |
3 Press the appropriate | PLUSCODE NO. | |||||
Number keys to input | ||||||
the PlusCode number |
| 123 |
|
|
| |
printed in the TV |
|
|
|
|
| |
listings for the TV |
|
|
|
|
|
|
| PRESS NUMBER KEY | |||||
broadcast you wish to |
| |||||
|
|
|
| THEN (OK) | ||
record, then press OK. |
| PRESS (PROG.) TO END | ||||
|
|
|
|
|
| |
Then;
If the Guide Channel Set screen appears
— go to step 4.
If the VCR Plus+ Program screen appears
—go to step 5.
●To make corrections, press CANCEL and input the correct PlusCode number.
